October 28, 2010

More Tmax400 - Caffenol-C-L


My Caffenol variants deliver reproducible results and I use them for even the most delicate jobs. Here again 2 samples with the Tmax400 in Caffenol-C-L with 1g/l KBr, semi-stand development, 60 minutes at 20 °C. 5 minutes presoak, 10 inversions initially, 3 inversions at 1, 2, 4, 8, 16 and 32 minutes. Left image exposed at EI 1600-3200, right one at EI 800. Don't use at EI 400 or less, will be overexposed with blown highlights, or reduce dev time! 800 - 1600 will produce best overall quality. If not pushing too heavy, the tonal range is comparable to Acros100 at EI 200! Both are ideal for scanning and highest subject contrast range.

Caffenol-C-L has proven to work greatly with high speed films. So it's usable for almost any kind of film.

Best - Reinhold

October 13, 2010

Tmax 400 @ 1600 - 4800 in Caffenol-C-L

Hello again,

good news from the coffee. For the appearance of this Salsa rock band I needed a fast film but only had Tmax400 available. First tests in Caffenol-C-L from 200 to 800 ASA showed overexposed and overdeveloped negatives, EI 200 and 400 were so dense that they were practically unsuable. 800 was OK, but still quite dense. So I thought that EI 1600 would be possible at least, maybe more even if I reduced the dev time or temperature slightly.

The picture of the drummer is exposed at  EI 1600 and is very fine imho. The singer/guitarist was poorly lightened, so the same settings as in the first pic lead to EI 4800. Exposure for both was 2.8/60 with the fabulous Rokkor 2.8/135 mm lens for my Minolta SLR, of course using a tripod. Grain is still quite small for these speeds and base fog low for a fast speed film.

Developed semi-stand in Caffenol-C-L with 1 gramm per liter potassium bromide (KBr). 5 minutes prewash, 60 minutes development at 18-19 °C, agaitation 30 seconds continuous initially, 3 times after 2, 4, 8, 16 and 32 minutes. Still low base fog, perfect even development. For EI 1600 - 3200  I would probably prefer 20-21 °C and 60 mins. Maybe even EI 6400 is possible. Maybe lowering the KBr to about 0.5 g/l could help, but watch the base fog.

Best regards - Reinhold